Cut Takeoff Time by 75% — Starting at $20/mo
PourScope handles the full workflow — measure slabs, footings, walls, columns, and zone splits fast, then carry that straight into pricing, invoicing, contract review, and site ops. No more bouncing between tools. No subscriptions. One payment, full access.
Built by a concretor. Not a software engineer guessing what you need.
10-Second Columns. 20-Second Lift Shafts.
Manual takeoff: 45 minutes per floor. PourScope: 4 minutes.
Try it free for 7 days. No credit card required.
< 4 min
889m² and 1,203m³ of concrete — a full basement slab, zone-split by thickness, measured and totalled.
Built for what still ends up manual in most takeoff workflows.
| Typical Workflow | PourScope |
|---|---|
| Set scale manually, re-calibrate every time you open a new PDF | Auto scale setup from a reference line — done once, works across all pages. |
| Redraw slabs, footings, walls, and columns in a generic CAD tool | Swipe measure built for concrete: zones, walls, footings, columns, and thickenings in one flow. |
| Guess pour sequence when measuring multi-level jobs across multiple plans | Level schedule supports multiple pours per level — Basement Pour 1, Pour 2 — without deleting previous work. |
| Manually flip between pages to check typical floor alignment | Ghost overlay lets you project any page over another to verify alignment and stamp matching markings across. |
| Dig through structural sheets by hand before pricing | AI QuickView reads the structural set into MPa schedules, slab detail, and missing-sheet warnings. |
| Separate tools for pricing, invoicing, contract review, and site ops | Takeoff, estimate workbook, invoicing, contract guard, and site ops all in one place. |
How it works
Wrangle the plans
Merge PDFs, split out the sheets you need, and set up your level schedule with pour breakdown before takeoff starts.
Measure and verify
Swipe zones, walls, footings, and columns. Use the ghost overlay to check typical floor alignment across pages, then stamp matching markings across with one click.
Price, send, track
Pull measured quantities into the estimate workbook, build the invoice, review the contract, and run site ops from the same job folder.
What's inside
Takeoff
Swipe measure for walls, footings, columns, thickenings, and slab zones. Colour-coded areas with live m² and m³ totals. Multi-page PDF support, undo history, straight-line toggle, and ortho snap for precise edge runs.
Job Setup
Scale calibration from any reference line. Level schedule with per-level MPA settings for columns and walls. Add multiple pour rows per level — Basement Pour 1, Pour 2 — so you can measure across separate plans without losing previous work.
Ghost Overlay
Project any page over another to check if typical floor markings align. Drag or nudge the overlay into position with 1/5/20/50px step controls, then stamp it — copying all markings to the current page at the matched offset.
AI QuickView
Reads structural sheets into usable slab, wall, and column schedules with MPa, RLs, and missing-sheet warnings. Saves hours of manual spec hunting before pricing starts.
Quote & Estimate
Live quote builder and estimate workbook. m² and m³ line items on separate rows so each unit type gets its own rate and total. Invoice builder and document tools move the job from measured to billed without switching tools.
Contract Guard
Review milestone dates, notice periods, builder-delay clauses, and quote-versus-contract mismatches before they become expensive on site.
Site Ops
Pour tracking, crew allocations, man-days, calendar, job logging, and drop folder — built around how concrete sites actually run, not a generic project management template.
Plan Tools
PDF merge and split to wrangle incoming plan packs. Keep only the sheets you need, combine separate PDFs into one clean set, and go into takeoff organised.
Jobs & Records
Job folders, pour records, and expense tracking tied back to each job. Everything the office needs to reconcile a job without asking site what happened.
What people using it say
“We've been running PourScope on our own jobs for over two years, and we've had a hand in building every part of it — because we needed it to actually work on site, not just look good in a demo. Between the two of us we've measured thousands of slabs, walls, and columns with it, and it still saves us hours every single week. The auto scale alone has ended re-calibrating every PDF by hand. The MPa and RL stitching means we stop finding mistakes on pour day instead of in the office. We built this because nothing else was made for concretors.”
— Peter & Darren, Statewide Concrete Services (running & co-developing PourScope for 2+ years)
“PourScope has completely changed my workflow. I used to spend 3-4 hours manually measuring columns and lift shafts on a single high rise takeoff. Now, I can do the same job in under 30 minutes. On a 20-level project, that's over 13 hours saved and at my rates, it pays for itself in the first 10 minutes of the first job.”
— Ben V., Concrete Estimator, Melbourne
“What I love most is the peace of mind. The auto MPa/height stitching and AI contract review have caught mistakes I would have missed, like a missing reinforcement spec that would have cost us $15K. It's not just faster; it's more accurate, and that's how we're winning tighter bids.”
— Alex D., Senior Estimator, Commercial Concrete Subcontractor
“I've tried other takeoff software that promises the world, but most of it is just a generic tool with a concrete label slapped on it. They're built by software engineers who don't understand the real world problems we face. PourScope is different — it's obvious it was built by someone who's been on the job site, and it solves problems other tools don't even see.”
— Jeff D., Estimating Manager, GBC Construction
“PourScope takes me from takeoff to invoice without bouncing between five different apps. The integration with my accounting software and the weather to takeoff feature streamlines the entire process. It's genuinely the only tool I need for my concrete estimating workflow.”
— Aaron S., Director, Outside Ideas
“My team was skeptical, thinking it was just another expensive piece of software. But the ROI was instant. We're producing more bids, winning more work, and we've even seen an 18% reduction in our administrative overhead because we're not double handling data. For the price, it's the best investment we've made.”
— Mark T., Concrete Subcontractor
Simple pricing. One plan.
$20/month. Full access. No tiers, no feature gating, cancel any time.
Full Access
- Full takeoff tool — zones, walls, footings, columns
- Multi-page PDF with page-by-page measurement
- Level schedule with multi-pour support
- Ghost overlay for typical floor alignment
- AI QuickView — structural sheet parser
- Estimate workbook with m² and m³ line items
- Invoice and document builder
- Contract Guard review tools
- Site Ops — pour tracking, crew, man-hours
- Job folders, calendar, and drop folder
- PDF merge and split tools
- Expense and labour records
Built for the real world
Shaped around how real estimators, foremen, and office crews actually work — not how a software team imagined they might.
< 4 min
Real job speed
$20
Per month, full access
8+
Integrated tools